Finally, in a flurry of indecision, I settled on a narrative piece structured around one of my favorite songs from musician and good friend of Base14, Rick DeSutter. Rick has been a key player in all of our recent short films, providing original music for Ara, Brian Paulson and Duck ♥ Teslacoil. The song I chose was “Shasta Creme Song,” not only for its wit but also its extremely short run time – only a little more than a minute. I set up a rostrum camera and lighting system Tuesday night and started animating bright and early Wednesday morning. By 11:59pm Wednesday, I had finished all animation and had the whole video wrapped up before class Thursday morning. Not bad!

The video was uploaded to YouTube Friday and has already garnered an impressive number of hits. It may not be perfect, but it’s spontaneous and fun, which makes it charming in a crude sort of way. Anywho, have yourself a watch and enjoy!

This announcement is coming out a bit late, but we wanted to spotlight our good friends over at Deny Conformity and The Crazy Monkeys, who have been cooking up some interesting music lately. This “electro-house sensation,” credited to an alternate identity called “Smac,” comes in the form of a free-to-download LP that you can snag right here. I’m told that the sound clips in this music were originally recorded for the Peabo movie, and somehow drove the album’s creation. If you survive this record, you might also like Smac’s earlier EP. And if that’s still not enough, there might be more on the way.

It is the distant future. The year 2000… Things are very different since the robotic uprising of the mid-nineties…
– Flight of the Conchords

Halloween is almost here, folks. And here at Base14 we couldn’t help but salute the much-loved HBO comedy show, Flight of the Conchords. If you haven’t been living under a rock for the last two years, you’ll know that FotC made robots cool again with their aptly titled song and music video: Robots. So of course, just as many other FotC fans are doing this season, I had to make my own Robo-Boogie Costume. The best part is: I’ve documented the entire process below, so everyone at home can follow along!

Step 1: Gather Supplies

One of the appeals of making your own FotC robot costume is it’s easy and cheap. Bret and Jemaine did us the courtesy to make the mundane appealing. So there aren’t many things you’ll need.

• Large cardboard box (approx. 80cm x 50cm x 30cm)
• Small cardboard box (approx. 25cm x 25cm x 25cm)
• Duct tape
• Silver spray paint
• 4-inch diameter dryer vent tubes
• 6-inch diameter dryer vent tubes
• Wire coat hanger
• Bright red paint
• Turquoise paint
• Empty water bottles
• Other old bottles/cans/bottle caps

Step 2: Make Blueprints

Now, if you’re one of those impulsive types that likes to jump into things with no planning, proceed to step 3. Otherwise, make sure you have a good schematic for you costume design. I took screen shots from the show and used the water bottle diameter as a ratio for determining the dimensions of the rest of the costume. Yeah, I’m that analytical. Here’s the final schematic. I had to nudge the numbers a bit to match my box and fit my body type. So adjust appropriately.

Step 3: Cut Out the Body

We’ll start with the robot’s body. I took a box and cut it down to fit the dimensions I wanted, then flattened it out into one sheet so I could cut out the arm holes. I used a compass to get nice clean circles, and cut them out with a mat knife.

Step 4: Add Function Buttons

Another important thing to add while the body is still flat is the function buttons. I am not sure what they used on the show (my best bet is Bret’s buttons are bottle caps and Jemaine’s buttons are the bottoms of 20-liter soda bottles). I took some artistic license and used the bottoms of aluminum cans, due to their smooth, button-like qualities. I suggest you just use whatever you’ve got lying around. These would be best attached with hot glue, but I don’t have a glue gun so I improvised with duct tape.

Step 5: Assemble Body

Once your holes are cut and function buttons affixed, it’s time to assemble the body. The more duct tape used in the step, the better. I needed extra cardboard to make the top of the body, so I built it separately with reinforced corners.  I designed it to fit the circumference of the body precisely. Then I wrapped the body sides around the top piece and taped them up to get a nice, strong body.

Step 6: Build the Head

Now that the body has been built, it’s time to construct the head. For this it’s good to find a single, small box that’s nearly a cube. I had to pull up the flaps on mine to get the right shape, but it worked.

Once you’ve got your box, there’s three main features to add: face hole, side bolts and top antenna. Make the face hole close to a square, leaving a little bit more room on the forehead for colored stripes. The most important thing, though, is just to make sure you can see out. After that attach the head bolts, which are the bottoms of water bottles. Again, hot glue would be ideal for this, but I got by with duck tape. Don’t worry that they’re clear now, the spray paint will make them opaque. Finally, I used a wire hanger to make a head antenna. If you want an antenna like Bret’s, you should find a broken TV set with one of those circular antennas.

Step 7: Paint

Well, now that all the construction is done, it’s time to paint this sucker! Myself and a friend who made his own robot costume both found a full can of spray paint barely covers the entire suit. So if you want a really heavy coat, I suggest you buy two cans. I let mine dry overnight before the next step.

Step 8: Final Touches

With the costume painted, it’s time for some final touches! The thing really comes to life with the addition of a bit of color, so I went out and bought the cheapest acrylic paint I could find and colored the function buttons red and blue. I also painted some tape red and put it on the helmet forehead, but if you have red tape to begin with, that’s even better. Finally, don’t forget the extremely important dryer vents for arms and legs. Through careful research, I decided that the arms should be 4-inch diameter vents and the legs 6-inch diameter vents. I got cheap and only bought the 4-inch, so my legs went un-robotized. I suspect that to keep the leg vents help up, one would need to make a duct tape belt or suspenders of some sort. It was difficult enough keeping the arm vents from slipping down. This issue requires further research.

Step 9: Boogie!

Robo-Boogie, that is. With the final touches your costume is complete and you’re ready to hit the town. Make sure to practice your dances before heading out, because the suit does cut down your mobility a bit. But if you use it to your advantage, you’ll be the hippest post-apocalyptic mechanical being on the scene.

Photo by: Tobias Beidermühle

Binary Solo! 00000001. 00000011. 00000111. 00001111!

In celebration of the upcoming release of Ara on DVD and Blu-Ray, we present to you the Ara music video “This Thing Won’t Render – The Mercy Mix.” It’s a crazy techno mix of lines from the movie arranged by none other than our own producer Shauvon McGill, and “skillfully” edited by yours truly. I did the whole thing in about 24 hours, and just tried to be absolutely as wacky as I could. This time I’m trying the YouTube embed, but if I don’t like it, I’ll get back to my custom video embedding.

This video along with many more extra-special features will be on the upcoming Ara DVD!